Model: 1750 Contact Us Gallery New & Updated Parts
Search
Cart 0 item(s): $0.00
   
Catalog
Axle Parts
Body Parts
Books & Information
Brakes
Clutch / Trans / Drive Line
Door Parts
Electric / Ignition
Emblems
Engine / Fuel System
Exterior
Gifts & Toys
Interior
NOS Parts
Seals
Service / Operators Manuals / Literature
Sheet Metal
Steering & Suspension
Used Parts
 
467012C1
international hervester Temp switch - new old stock 467012C1
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		369500c1, 1700291c1, 332623C91. New never been used Made in the 1970's by International Harvester. Fleetguard was the name on the IH in-house brand.
Air Filter element NEW OLD STOCK- 2 And 4 Barrel Carb New Old Stock
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		This is new and improved. So much easier to install that you will look forward to taking apart your doors. You will love it Handle not included.
Escutcheons - New
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175...
Adapter Speedo - New Old Stock
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175...
Price: $78.83 each Price: $45.77 Price: $14.95 In stock now. Price: $179.34 each
This is the female connector the holds two male spade connectors at right angle to one another.
Loadstar Electrical Connector, 2way Female (type 1 Terminal)
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		Kit contains door to body seal plus the cosmetic rubber windlace that goes around the door pinch seem. Kit contains enough material to seal up two doors, for both front doors and back doors of your International Loadstar Crew Cab. Loadstar weatherstripping Loadstar window seals International Harvester Loadstar window seals weatherstripping
Loadstar Door To Body Weatherstrip Kit W/ Windlace - 2 Door Kit
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175...
2 way bullet connector flat mates to it's self - new
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		Thermostat for a MV404 or MV446 Gas engine 1976-1981 Replaces IH Part 446437C1
180 Degree Thermostat for MV404 & MV446 Gas Engine
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175...
Price: $6.49 each Price: $224.17 each Price: $1.53 each Price: $34.40 Each
This is a kit to seal up two doors, either the front or rear, of a Loadstar crew cab.
Door To Body Seal Kit for Loadstar Trucks
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		382303C1
Amp meter - New old stock -= 382303C1
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		This grommet holds your PCV Valve on to your valley pan on all V-8 engines
PCV Seal Grommet For IH V-8 Engines
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		This is a special glue to adhere weatherstripping to metal body parts, such as the metal lip around the doors, or around windows. This is also used to attach the free ends of weatherstrips when they come together, like the one that goes around the doors or tailgate. Black in color, this will blend in with the rubber and not be noticeable to the average person.
Contact Cement - Weatherstrip Adhesive "Glue"
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175...
Price: $440.92 Kit Price: $367.01 each Price: $29.48 each Price: $29.10 each
S Serices power brake booster. hydro booster. hydromax booster
hydromax - rebuilt
Model(s): 1750 		New windshield seal. Known as a windshield retainer, it holds the windshield in the frame, it is the weatherstrip that goes around the windshield and keeps the rain and wind out. This is a new rubber, ready to install. This fits Loadstars 57-78, also binder series ac and bc, as well as travelcrews 1962-after We strongly recommend that you use a professional installer to put this in, both to ensure you do not break the glass, and to make sure you seal it completely and protect it against water getting between the rubber and the frame, causing future rustout of the frame. IH conventional cab Loadstar, Binder series AC and BC Travelcrew 62 and Up
Seal - Windshield - 1957-78 IH Loadstar cab Travelall, Series AC & BC
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		Replacement for 369500C1. High-flow air filter cleaner assembly to fit perfectly on the four barrel carburetors used on Scouts and Travelalls. 9"x 2.75"
Chrome Air Filter Assembly - 369500C1
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		Includes, housing, lens and LED lights and pigtail. This is an almost perfect fit. The screw holes are a match but the unseen recess may need to be trimmed 1/16"th with just a little bit of filing.
LED Tail Light - New
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175...
Price: $798.65 Rebuild Price: $139.45 Each Price: $57.90 Price: $49.65 each
Regulators roll up and down the windows in the rear doors of your 52-79 Loadstars.
Rear Door Window Regulator Reconditioned For front doors and or rear Crew Cab Loadstar
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		Used but in perfect condition.
Vacuum Wiper Motor - near new
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		We have a seal kit that comes with the door glass wipers (the ones that fit inside the door against the flat part of the glass), and the channels that it rides in. These are beautiful reproductions, made from the finest material ready to install. These will tighten up those window panes and kill that annoying rattling, not to mention keeping the wind and rain out. You have no idea how comfortable your Loadstar crew cab pickup can be until you install these! Each kit comes with everything needed to complete all four side doors.
Window Seal Kit Loadstar, 4 Door
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		This connector is compatible with all standard trailer and DOT approved commercial transportation wiring. If you are converting your tail lights to LED, do it right way with these, made in the USA, over molded terminal connectors that will insure that you never hook them up backwards. LED tail lights are very sensitive to how they are hooked up and this standard LED over molded connector insures that you will never have a problem. LED lights have a few differences from old incandescent light bulbs. This connector organizes your wires in such a way as to prevent any confusion. If you have installed your new LED tail lights, these connectors have to be added to your wiring harness. Once this is done, you are assured a weather and water resistant and reliable connection that only takes seconds. Made in the USA Bullet connector diameter is .155 inches in diameter. .155 diameter is the national standard for trailer and commercial transportation lights.
LED connector over mold for LED lights - Made in USA
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175...
Price: $356.76 Price: $302.79 each Price: $464.45 each Price: $5.14 each

Loadstarparts.com is not affiliated with International Motor Company. Loadstar is a registered trademark of International Motor Company. Any mention of Loadstar is for description purposes only.

Call to Order: 866-235-1979
Credit Card Badges
Privacy Policy | Legal Notices | Terms & Conditions | Shipping Policy

A division of ©2026 Pacific Supply Group.