Model: 1610 Contact Us Gallery New & Updated Parts
Search
Cart 0 item(s): $0.00
   
Catalog
Axle Parts
Body Parts
Books & Information
Brakes
Clutch / Trans / Drive Line
Door Parts
Electric / Ignition
Emblems
Engine / Fuel System
Exterior
Gifts & Toys
Interior
NOS Parts
Seals
Service / Operators Manuals / Literature
Sheet Metal
Steering & Suspension
Used Parts
 
This is a special glue to adhere weatherstripping to metal body parts, such as the metal lip around the doors, or around windows. This is also used to attach the free ends of weatherstrips when they come together, like the one that goes around the doors or tailgate. Black in color, this will blend in with the rubber and not be noticeable to the average person.
Contact Cement - Weatherstrip Adhesive "Glue"
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		This connector is compatible with all standard trailer and DOT approved commercial transportation wiring. If you are converting your tail lights to LED, do it right way with these, made in the USA, over molded terminal connectors that will insure that you never hook them up backwards. LED tail lights are very sensitive to how they are hooked up and this standard LED over molded connector insures that you will never have a problem. LED lights have a few differences from old incandescent light bulbs. This connector organizes your wires in such a way as to prevent any confusion. If you have installed your new LED tail lights, these connectors have to be added to your wiring harness. Once this is done, you are assured a weather and water resistant and reliable connection that only takes seconds. Made in the USA Bullet connector diameter is .155 inches in diameter. .155 diameter is the national standard for trailer and commercial transportation lights.
LED connector over mold for LED lights - Made in USA
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		This is the female connector the holds two male spade connectors at right angle to one another.
Loadstar Electrical Connector, 2way Female (type 1 Terminal)
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		Small "clamp" where the water coolant pipes (see related parts) go into the cylinder head. For IH 304 and 345, 392, V8s. and all other IH engine.
Clamp At Cylinder Head For IH Water Pipes - 227627R2
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175...
Price: $29.10 each Price: $5.14 each Price: $6.49 each Price: $26.28
These are the buttons that are made to have the "IH" logo in the middle.
Horn Button "IH" New Old Stock
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		Regulators roll up and down the windows in the rear doors of your 52-79 Loadstars.
Rear Door Window Regulator NEW OLD STOCK For The Crew Cab Loadstar
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		Used but in perfect condition.
Vacuum Wiper Motor - near new
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		467012C1
international hervester Temp switch - new old stock 467012C1
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175...
Price: Not Currently Available Price: Unavailable Price: $302.79 each Price: $78.83 each
We test fit this kit in a Scout 80-800 or 1961-68 Pickup and it works great! This kit will most likely work on models earlier than 1959. We have just not yet had a chance to install it in 1958 or earlier. Electric windows make any Scout or pickup seem like a more modern vehicle and roll up and down with a single touch! This kit works for 2 doors, so if you have a 4 door 1961-68 Travelall you will need 2 kits to end up with 4 electric windows. Motor lives inside the door. Flexable end attaches where window crank would be and rolls up window that way. This attachment is covered up by the black cups in the kit. Relay and fuse is not included. We sell them, ask salesperson.
Power Windows Kit - Two Window Kit
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		Hose fuel - new old stock. - 73098R91 MT127 MT132
Hose fuel - new old stock. - 73098R91
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		49430H R2800 axle --1087Y for K-1 and K-2 R1100 rear axle. 16\" in diameter.
Differential Cover Gasket -KS6 And KS7 With Axle R2450
Model(s): 1600, 1603, 1610 		priced each - used.
Mirror Vintage 1960's - Used
Model(s): 1600, 1603, 1610, 1700
Price: $369.36 CALL FOR AVAILABILITY Price: $86.53 Price: $17.73 each Price: $116.13 each
Used IH electronic ignition control gold box. We check the used ones but there are no returns on used ones.
Used IH Gold Box
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		For all IH engines. Need 16 for each engine.
NOS Valve Stem Seals
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		Window handle. Fits Loadstar. Get back that new truck feeling.
Window Crank - Loadstar
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		These wheel cylinders are for front axle 868991R1 with 14x2-1/2\" brakes. 2 are required per wheel. Each wheel requires a left and a right.
Wheel Cylinder, Front - Loadstar 1600 Each Wheel Requires A Left And A Right.
Model(s): 1600, 1603, 1610
Price: $173.75 each Price: $1.16 each Price: $75.49 each Price: $80.11 - $80.11
This is new and improved. So much easier to install that you will look forward to taking apart your doors. You will love it Handle not included.
Escutcheons - New
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		377512C1. Gas or diesel fuels. This sender was used officially on Loadstars from 1972 to 79. It could have been used for previous years. But we do not know it will work on earlier Loadstars. It is most likely that the sender will work if you have a 1960's Loadstar as well.
Fuel Sender - New Old Stock Loadstar 1972-79, 377512C1
Model(s): 1600, 1603, 1610, 1700, 1800 		Order one high and one low tone to work in combination producing a note similar to the original. Comes with mounting instructions and hardware.
Horn - Original Type - Loadstar
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		The next time you need to service your vacuum brake booster, the flame arrestor, the PCV valve, the air cleaner, the oil breather element, or the valve cover, be sure to replace the hoses for leak-free operation! Tell us how much you need, and we will add that to the rest of your order. This is used as breather hose on many engines, going between the air cleaner and the PCV valve, the flame arrestor and the air cleaner, the valve cover and the air cleaner, the oil fill cap and the air cleaner, and the manifold and the brake booster.
1/2" Breather, Booster, & PCV Hose
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175...
Price: $14.95 CURRENTLY BACKORDERED Price: $239.52 each Price: $56.11 - $56.11 each Price: $6.78 Sold Per Foot

Loadstarparts.com is not affiliated with International Motor Company. Loadstar is a registered trademark of International Motor Company. Any mention of Loadstar is for description purposes only.

Call to Order: 866-235-1979
Credit Card Badges
Privacy Policy | Legal Notices | Terms & Conditions | Shipping Policy

A division of ©2025 Pacific Supply Group.