Model: 1700 Contact Us Gallery New & Updated Parts
Search
Cart 0 item(s): $0.00
   
Catalog
Axle Parts
Body Parts
Books & Information
Brakes
Clutch / Trans / Drive Line
Door Parts
Electric / Ignition
Emblems
Engine / Fuel System
Exterior
Gifts & Toys
Interior
NOS Parts
Seals
Service / Operators Manuals / Literature
Sheet Metal
Steering & Suspension
Used Parts
 
Used IH electronic ignition control gold box. We check the used ones but there are no returns on used ones.
Used IH Gold Box
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		These are OEM lap belts with mounting hardware.
Seat Belt - International
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175...
2 way bullet connector flat mates to it's self - new
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		This connector is compatible with all standard trailer and DOT approved commercial transportation wiring. If you are converting your tail lights to LED, do it right way with these, made in the USA, over molded terminal connectors that will insure that you never hook them up backwards. LED tail lights are very sensitive to how they are hooked up and this standard LED over molded connector insures that you will never have a problem. LED lights have a few differences from old incandescent light bulbs. This connector organizes your wires in such a way as to prevent any confusion. If you have installed your new LED tail lights, these connectors have to be added to your wiring harness. Once this is done, you are assured a weather and water resistant and reliable connection that only takes seconds. Made in the USA Bullet connector diameter is .155 inches in diameter. .155 diameter is the national standard for trailer and commercial transportation lights.
LED connector over mold for LED lights - Made in USA
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175...
Price: $173.75 each Price: $227.93 each Price: $1.53 each Price: $5.14 each
priced each - used.
Mirror Vintage 1960's - Used
Model(s): 1600, 1603, 1610, 1700 		We typically gap spark plugs to .035 when installing, which is very close to the Champion factory gap. International Harvester Loadstar spark plug
Loadstar Spark Plug
Model(s): 1600, 1700, 1800 		Throwout Bearing & Grease Sleeve Loadstar 1700. Inner diameter is 1 -5/8\". Was used on V-8 gas engines.
Throwout Bearing & Grease Sleeve Loadstar 1700
Model(s): 1600, 1700, 1800 		Rear main crankshaft seal for international-built V8, 345, 395 cid. engines.
Rear Main Seal - All IH V8 345, 392 cid. Engines
Model(s): 1600, 1700, 1800
Price: $116.13 each Price: $6.28 Price: $141.74 each Price: $73.14 each
For all IH engines. Need 16 for each engine.
NOS Valve Stem Seals
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		Wiring harness front head light and turn signals. Used on Loadstars built from 1972-79 <img src="/images/usaflag-backed.gif" /> Made in America. DISCONNECT BATTERY before doing any work. PLEASE READ BEFORE YOU ORDER: At least 40 years have passed since your machine was built. Many people have worked on, and changed things from factory configuration. It is customer's responsibility to make sure that harness and contact arrangement is correct for the application. Because the previous old harnesses may have damaged components in your electrical system, Pacific Supply Group accepts no liability for any device that you attach this new harness to. International Harvester wiring harness Loadstar
Loadstar Headlight wiring Harness 1972-79 424489C91
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		Throw out bearing for V8 Engines and IH inline 220, 240, and 264's. These are brand new throw out bearing for your old truck! Ball Bearing Bore=1.6265" Outer Diameter=3.6875" Width=3.385" Throwout
Throw Out Bearing, For All IH V-8 Engines.1957 To 1980
Model(s): 1600, 1700, 1800 		We have a seal kit that comes with the door glass wipers (the ones that fit inside the door against the flat part of the glass), and the channels that it rides in. These are beautiful reproductions, made from the finest material ready to install. These will tighten up those window panes and kill that annoying rattling, not to mention keeping the wind and rain out. You have no idea how comfortable your Loadstar crew cab pickup can be until you install these! Each kit comes with everything needed to complete all four side doors.
Window Seal Kit Loadstar, 4 Door
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175...
Price: $1.16 each Price: $266.77 each Price: $66.81 Each Price: $464.45 each
This is a kit to seal up two doors, either the front or rear, of a Loadstar crew cab.
Door To Body Seal Kit for Loadstar Trucks
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		1600 & 1700. Possibly more models. Special order - not a returnable item.
Steering gear Box And Pitman Arm For Load Stars. - 470377c92
Model(s): 1600, 1603, 1610, 1700, 1703 		467012C1
Temp switch - new old stock 467012C1
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		IH pilot bearings are in stock for the 3 speed and 4 speed transmissions. Pilot bearing noise is annoying, but can also damage your input shaft.
Pilot Bearing - New Production
Model(s): 1600, 1700, 1800
Price: $100.31 CALL FOR AVAILABILITY Price: 2865.32 Price: $78.83 each Price: $33.03 each
New windshield seal. Known as a windshield retainer, it holds the windshield in the frame, it is the weatherstrip that goes around the windshield and keeps the rain and wind out. This is a new rubber, ready to install. This fits Loadstars 57-78, also binder series ac and bc, as well as travelcrews 1962-after We strongly recommend that you use a professional installer to put this in, both to ensure you do not break the glass, and to make sure you seal it completely and protect it against water getting between the rubber and the frame, causing future rustout of the frame. IH conventional cab Loadstar, Binder series AC and BC Travelcrew 62 and Up
Seal - Windshield - 1957-78 IH Loadstar cab Travelall, Series AC & BC
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		Includes, housing, lens and LED lights and pigtail. This is an almost perfect fit. The screw holes are a match but the unseen recess may need to be trimmed 1/16"th with just a little bit of filing.
LED Tail Light - New
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		This is a pair of seals for the vent windows in International Harvester Loadstar trucks from 1961-1977. Loadstar window seals
Wing Vent Window Seal - 1961-77 Loadstar trucks
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		We test fit this kit in a Scout 80-800 or 1961-68 Pickup and it works great! This kit will most likely work on models earlier than 1959. We have just not yet had a chance to install it in 1958 or earlier. Electric windows make any Scout or pickup seem like a more modern vehicle and roll up and down with a single touch! This kit works for 2 doors, so if you have a 4 door 1961-68 Travelall you will need 2 kits to end up with 4 electric windows. Motor lives inside the door. Flexable end attaches where window crank would be and rolls up window that way. This attachment is covered up by the black cups in the kit. Relay and fuse is not included. We sell them, ask salesperson.
Power Windows Kit - Two Window Kit
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175...
Price: $139.45 Each Price: $49.65 each Price: $432.23 each Price: $369.36 CALL FOR AVAILABILITY

Loadstarparts.com is not affiliated with International Motor Company. Loadstar is a registered trademark of International Motor Company. Any mention of Loadstar is for description purposes only.

Call to Order: 866-235-1979
Credit Card Badges
Privacy Policy | Legal Notices | Terms & Conditions | Shipping Policy

A division of ©2025 Pacific Supply Group.