Model: 1600 Contact Us Gallery New & Updated Parts
Search
Cart 0 item(s): $0.00
   
Catalog
Axle Parts
Body Parts
Books & Information
Brakes
Clutch / Trans / Drive Line
Door Parts
Electric / Ignition
Emblems
Engine / Fuel System
Exterior
Gifts & Toys
Interior
NOS Parts
Seals
Service / Operators Manuals / Literature
Sheet Metal
Steering & Suspension
Used Parts
 
Throwout Bearing & Grease Sleeve Loadstar 1700. Inner diameter is 1 -5/8\". Was used on V-8 gas engines.
Throwout Bearing & Grease Sleeve Loadstar 1700
Model(s): 1600, 1700, 1800 		IH pilot bearings are in stock for the 3 speed and 4 speed transmissions. Pilot bearing noise is annoying, but can also damage your input shaft.
Pilot Bearing - New Production
Model(s): 1600, 1700, 1800 		We have a seal kit that comes with the door glass wipers (the ones that fit inside the door against the flat part of the glass), and the channels that it rides in. These are beautiful reproductions, made from the finest material ready to install. These will tighten up those window panes and kill that annoying rattling, not to mention keeping the wind and rain out. You have no idea how comfortable your Loadstar crew cab pickup can be until you install these! Each kit comes with everything needed to complete all four side doors.
Window Seal Kit Loadstar, 4 Door
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		These wheel cylinders are for front axle 868991R1 with 14x2-1/2\" brakes. 2 are required per wheel. Each wheel requires a left and a right.
Wheel Cylinder, Front - Loadstar 1600 Each Wheel Requires A Left And A Right.
Model(s): 1600, 1603, 1610
Price: $141.74 each Price: $33.03 each Price: $464.45 each Price: $80.11 - $80.11
382303C1
Amp meter - New old stock -= 382303C1
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		New window crank handle for 62-78 Loadstars. 874053R91
Window Crank Handle - 874053R91
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		Main under dash harness 1961 to 1966 loadstar trucks. 62 am Gen code 08054 Left Hand Drive. Below vin #G285185, Below vin# H786001 <img src=\"/images/usaflag-backed.gif\" /> Made in America. DISCONNECT BATTERY before doing any work. PLEASE READ BEFORE YOU ORDER: At least 40 years have passed since your machine was built. Many people have worked on, and changed things from factory configuration. It is customer\'s responsibility to make sure that harness and contact arrangement is correct for the application. Because the previous old harnesses may have damaged components in your electrical system, Pacific Supply Group accepts no liability for any device that you attach this new harness to.
Harness Main Under Dash - New Old Stock. 61-68
Model(s): 1600, 1603, 1610, 1700 		Includes, housing, lens and LED lights and pigtail. This is an almost perfect fit. The screw holes are a match but the unseen recess may need to be trimmed 1/16"th with just a little bit of filing.
LED Tail Light - New
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175...
Price: $367.01 each Price: $33.12 each Price: $715.58 each Price: $49.65 each
This connector is at the fire wall of many of the Trucks, Travelall and Scouts. New production, made out of carbon fiber impregnated plastic.
Electrical Connector new production 322627C1
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		This connector is compatible with all standard trailer and DOT approved commercial transportation wiring. If you are converting your tail lights to LED, do it right way with these, made in the USA, over molded terminal connectors that will insure that you never hook them up backwards. LED tail lights are very sensitive to how they are hooked up and this standard LED over molded connector insures that you will never have a problem. LED lights have a few differences from old incandescent light bulbs. This connector organizes your wires in such a way as to prevent any confusion. If you have installed your new LED tail lights, these connectors have to be added to your wiring harness. Once this is done, you are assured a weather and water resistant and reliable connection that only takes seconds. Made in the USA Bullet connector diameter is .155 inches in diameter. .155 diameter is the national standard for trailer and commercial transportation lights.
LED connector over mold for LED lights - Made in USA
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		Window handle. Fits Loadstar. Get back that new truck feeling.
Window Crank - Loadstar
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		1600 & 1700. Possibly more models. Special order - not a returnable item.
Steering gear Box And Pitman Arm For Load Stars. - 470377c92
Model(s): 1600, 1603, 1610, 1700, 1703
Price: $52.64 each Price: $5.14 each Price: $75.49 each Price: $2865.32
Electrical connector for the engine compartment at the fire wall .
Loadstar Electrical Connector
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		Hose fuel - new old stock. - 73098R91 MT127 MT132
Hose fuel - new old stock. - 73098R91
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175...
header - New Old Stock
Model(s): 1600, 1703, 1800, 1890 		1600 loadstar with hydraulic brakes. Banjo adaptor 52636R1, banjo bolt 51828R1
Hose Hydraulic Brakes 1600- New Old Stock
Model(s): 1600
Price: $25.33 each Price: $86.53 Price: $385.02 each Price: $73.11
This is a kit to seal up two doors, either the front or rear, of a Loadstar crew cab.
Door To Body Seal Kit for Loadstar Trucks
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		This is a special glue to adhere weatherstripping to metal body parts, such as the metal lip around the doors, or around windows. This is also used to attach the free ends of weatherstrips when they come together, like the one that goes around the doors or tailgate. Black in color, this will blend in with the rubber and not be noticeable to the average person.
Contact Cement - Weatherstrip Adhesive "Glue"
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		Order one high and one low tone to work in combination producing a note similar to the original. Comes with mounting instructions and hardware.
Horn - Original Type - Loadstar
Model(s): 1600, 1603, 1610, 1700, 1703, 173FC, 173RE, 175... 		2751164R3 Reverse down
Decal shift pattern transmission paragraph - 2751164R3
Model(s): 1600
Price: $440.92 Kit Price: $29.10 each Price: $56.11 - $56.11 each Price: $49.91 each

Loadstarparts.com is not affiliated with International Motor Company. Loadstar is a registered trademark of International Motor Company. Any mention of Loadstar is for description purposes only.

Call to Order: 866-235-1979
Credit Card Badges
Privacy Policy | Legal Notices | Terms & Conditions | Shipping Policy

A division of ©2026 Pacific Supply Group.